tunnel-stats-show

This command is used to display the tunnel statistics on the switch.


 

Informational Note:  This command is only supported on E68 and E28 platforms.

Syntax   tunnel-stats-show

Use any of the following options to display tunnel statistics:

time date/time: yyyy-mm-ddTHH:mm:ss

Display by date and time.

start-time date/time: yyyy-mm-ddTHH:mm:s

Display by start date and time.

end-time date/time: yyyy-mm-ddTHH:mm:ss

Display by end date and time.

duration duration: #d#h#m#s

Display by duration.

interval duration: #d#h#m#s

Display by interval.

since-start

Specify a start time for the statistics.

older-than duration: #d#h#m#s

Display statistics older than a specific date.

within-last duration: #d#h#m#s

Display statistics within a specific duration.

tunnel-name tunnel-name

Display by tunnel name.

counter counter-number

Displays the number of counters.

ibytes ibytes-number

Displays the number of incoming bytes.

ibits ibits-number

Displays the number of incoming bits.

iUpkts iUpkts-number

Displays the number of incoming Unicast packets.

iBpkts iBpkts-number

Displays the number of incoming Broadcast packets.

iMpkts iMpkts-number

Displays the number of incoming Multicast packets.

iPauseFs
iPauseFs-number

Displays the number of incoming Pause frames.

iCongDrops iCongDrops-number

Displays the number of incoming packets dropped due to congestion.

ierrs errs-number

Displays the number of incoming packets with errors.

obytes obytes-number

Displays the number of outgoing bytes.

obits obits-number

Displays the number of outgoing bits.

oUpkts oUpkts-number

Displays the number of outgoing Unicast packets.

oBpkts oBpkts-number

Displays the number of outgoing Broadcast packets.

oMpkts oMpkts-number

Displays the number of outgoing Multicast packets.

oPauseFs
oPauseFs-number

Displays the number of outgoing Pause frames.

oCongDrops oCongDrops-number

Displays the number of outgoing packets dropped due to congestion.

oerrs oerrs-number

Displays the number of outgoing packets with errors.

mtu-errs mtu-errs-number

Displays the number of MTU errors.

HER-pkts HER-pkts-number

Displays the number of head-end replicated packets.

HER-bytes HER-bytes-number

Displays the number of head-end replicated bytes.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None.

Access   CLI

History   

Version 1.2

Command introduced.

Version 2.2.2

The parameter, type, added.

Version 2.2.3

The parameter router-if replaced name-string with vrouter-hw-if name option.

Version 2.3.1

The parameter, active, added.

Version 2.6.0

The parameters, HER-pkts and HER-bytes, added.

Version 3.0.0

The following parameters added: ibits and obits.

Usage   Tunnels are used to encapsulate unsupported protocols on a network. Use this command to display a list of tunnels on a fabric.

Examples  To display a list of all tunnels on a switch, use the following command:

CLI network-admin@switch > tunnel-stats-show

See Also   

tunnel-stats-clear