vflow-stats-show

This command displays flow statistics for Layer 2 Ethernet or Layer 3 Internet Protocol (IP) traffic.

Syntax   vflow-stats-show [name Flow_Name] [id Flow_ID] [start-time yyyy-mm-ddThh:mm:ss] [end-time yyyy-mm-ddThh:mm:ss][dur duration-number] interval duration: #d#h#m#s since-start|no-since-start older-than duration: #d#h#m#s within-last duration: #d#h#m#s name vflow name id

Specify any of the following options:

start-time yyyy-mm-ddThh:mm:ss

Specifies the start time of the flow using the notation yyyymm-

ddThh:mm:ss.

end-time yyyy-mm-ddThh:mm:ss

Specifies the start time of the flow using the notation yyyymm-

ddThh:mm:ss

dur duration-number

Specifies the duration of the flow (in seconds).

interval duration: #d#h#m#s

Specifies the length of time between collection intervals.

since-start|no-since-start

Specifies if the statistics are collected from the start of the vflow.

older-than duration: #d#h#m#s

Specifies if the statistics are older than the stated duration.

within-last duration: #d#h#m#s

Specifies the statistics collected within the last duration.

name vflow name

Specifies the name of the vflow.

vnet vnet-name

Specifies the name of the VNET.

id

Specifies the ID assigned.

 

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

 

Defaults   None.

Access   CLI

History   .

Version 1.2

Command introduced.

Version 2.4.1

The parameter, vnet, added.

Usage   Each fabric, cluster, standalone switch, or virtual network can track application flow statistics. This command displays flow statistics.

Examples  This example shows how to display flow statistics.

CLI network-admin@switch > vflow-stats-show

switch       name                 packets bytes cpu-packets cpu-bytes

pleiades24   IGMP-Flow            1.98M   130M  1.99M       123M

pleiades24   LLDP-Flow            218K    24.2M 218K        23.4M

pleiades24   Host-Agent-Discover  3.92K   251K  0           0

pleiades24   ECP                  0       0     0           0

pleiades24   Fabric-Discovery    282K     159M  273K        157M

pleiades24   SYSTEM-S            777K     60.2M 763K        56.0M

pleiades24   SYSTEM-F            719K     67.3M 711K        63.5M

pleiades24   SYSTEM-R            288K     18.0M 285K        16.7M

pleiades24   System-A            36.5M    2.28G 36.5M       2.14G

pleiades24   DHCP-client         83.6K    40.7M 37.9K       19.3M

pleiades24   DHCP-server         53.2K    23.0M 31.4K       10.5M

See Also   

vflow-create

vflow-delete

vflow-modify

vflow-show

vflow-class-create

vflow-class-delete

vflow-class-show

vflow-snoop