This command deletes an existing VLAN or VXLAN.

Syntax   vlan-delete

id vlan-id

Specify the VLAN identifier. This is a value between 2 and 4092.

range vlan-list

Specify a range of VLAN IDs.

vnet vnet-name

Specify the VNET assigned to this VLAN.

Defaults   None.

Access   CLI

History   .

Version 1.2

Command introduced.

Version 2.4.1

The parameter, vnet, added.

Version 2.6.2

The parameter, range, added.

Usage   VLANs can be used to isolate network traffic at Layer 2. Use this command to delete an existing VLAN.


Informational Note:  The VLAN identifiers 0 and 4095 are reserved and cannot be used per the IEEE 802.1Q standard.

The range of configurable VLAN identifiers is 2 through 4092.

Examples  To delete a VLAN with the identifier 7, use the following command:

CLI network-admin@switch > vlan-delete id 7

See Also