Virtual Router Bidirectional Forwarding

vrouter-bfd-neighbor-show

Bidirectional Forwarding Detection (BFD) provides fast BFD peer failure detection times independently of all media types, encapsulations, topologies, and routing protocols BGP, EIGRP, IS-IS, and OSPF. By sending rapid failure detection notices to the routing protocols in the local router to initiate the routing table recalculation process, BFD contributes to greatly reduced overall network convergence time.

Syntax   vrouter-bfd-neighbor-show vrouter-name name-string out-addr ip-address neighbor ip-address local-discr local-discr-number remote-discr remote-discr-number holdown holdown-number(ms) multiplier multiplier-number state unknown|admin-down|down|init|up interface interface-string flap-count flap-count-number remote-router remote-router-string

vrouter-name name-string

Specifies a name for the vRouter service.

Specify the following BFD arguments:

out-addr ip-address

Specifies the outgoing IP address.

neighbor ip-address

Specifies a neighbor IP address.

local-discr local-discr-number

Specifies the local discriminator.

remote-discr remote-discr-number

Specifies the remote discriminator.

holdown holdown-number(ms)

Specifies the detection time if the BFD session is established.

multiplier multiplier-number

Specifies a detection time multiplier.

state unknown|admin-down|down|init|up

Specifies the state of the BFD session.

interface interface-string

Specifies the interface of the connection.

flap-count flap-count-number 

Specifies the flap count on the router.

remote-router remote-router-string

Specifies the remote router name derived from the IP address.

Defaults   None.

Access   CLI

History   

Version 2.2.6

Command introduced.

Version 2.4.1

The parameters, flap-count and remote-router, added.

Usage   Displays information about Bidirectional Forwarding Direction neighbors.

Examples  To display information about BFD, use the following command:

CLI network-admin@switch > vrouter-bfd-neighbor-show

See Also   

vrouter-create

vrouter-delete

vrouter-migrate

vrouter-modify

vrouter-show

vrouter-bgp-add

vrouter-bgp-remove

vrouter-bgp-show

vrouter-igmp-static-join-add

vrouter-igmp-static-join-remove

vrouter-igmp-static-join-show

vrouter-interface-add

vrouter-interface-config-modify

vrouter-interface-remove

vrouter-interface-show

vrouter-ospf-add

vrouter-ospf-remove

vrouter-ospf-show

vrouter-ospf-neighbor-show

vrouter-rip-add

vrouter-rip-remove

vrouter-rip-show

vrouter-static-route-add

vrouter-static-route-remove

vrouter-static-route-show