Virtual Router Forwarding Information Database


This command is used to display information about Address Resolution Protocol (ARP) in the forwarding information database. Before using this command, the switch must be part of a fabric.

Syntax   vrouter-fib-arps-show vrid vrid-number ip ip-address if-id if-id-number port port-number vnet vnet-name vlan vlan-id mac mac-address egress-id egress-id-number flags ECMP|Trunk

vrid vrid-number

Displays the virtual router identifier.

ip ip-address

Displays the IP address.

if-id if-id-number

Displays the interface identifier.

port port-number

Displays the port number.

vnet vnet-name

Specifies the VNET of the router.

vlan vlan-id

Displays the VLAN identifier.

mac mac-address

Displays the MAC address.

egress-id egress-id-number

Displays the egress identifier.

flags ECMP|Trunk|route-to-if|local-subnet|hit|

Displays hardware flags.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.


Display output in ascending order.


Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.


Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.


Display the number of entries in the output. This is useful with vRouter show commands.


Display full values in the output instead of scaled approximate values.


Display integer values instead of mapped values


Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI


Version 2.2.5

Command introduced.

Version 2.4.1

The parameter, vnet, added.

Version 2.6.2

Additional options added to flags, KEEP-SMAC and KEEP-TTL.

Version 3.1.0

The parameter, drop, added.

Usage   Use this command to display ARP information in the forwarding information database.

Examples  To display ARP information, use the following syntax:

CLI network-admin@switch > vrouter-fib-arps-show format all layout vertical

switch:    aquila22-m


if-id:     0

vlan:      113

mac:       66:0e:94:9f:30:aa


switch:    aquila22-m


if-id:     0

vlan:      113

mac:       66:0e:94:f8:74:66


switch:    aquila22-m


if-id:     1

vlan:      115

mac:       66:0e:94:f8:74:66