vrouter-igmp-static-join-show

This command displays the Internet Group Management Protocol (IGMP) on a virtual router (vRouter) service on a fabric, cluster, or standalone switch..


 

Informational Note:  IGMPv1 is not supported in Netvisor or ONVL. If you are using IGMPv1, you must disable IGMP snooping on the Pluribus Networks switch.

Syntax   vrouter-igmp-static-join-show vrouter-name name-string [name name-string] [group-ip ip-address] [source-ip ip-address] [interface nic]

vrouter-name name-string

Specifies the name of the vRouter service.

Specify the following IGMP static join arguments:

name name-string

Specifies the name of the IGMP configuration.

group-ip ip-address

Specifies the group IP address used to statically bind to the interface.

source-ip ip-address

Specifies the source IP address for the IGMP query.

interface nic

Specifies the type of interface for IGMP.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

 

Defaults   None.

Access   CLI.

History   Command introduced in nvOS Version 1.2.1.

Usage   Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a vRouter service that forwards traffic between networks and implements IPv4 protocols. This command displays information about IGMP on a vRouter.

Examples  To display all IGMP information on all vRouter services, use the following command:

CLI network-admin@switch > vrouter-igmp-static-join-show layout vertical

See Also   

vrouter-create

vrouter-delete

vrouter-migrate

vrouter-modify

vrouter-show

vrouter-bgp-add

vrouter-bgp-remove

vrouter-bgp-show

vrouter-igmp-static-join-add

vrouter-igmp-static-join-remove

vrouter-interface-add

vrouter-interface-modify

vrouter-interface-remove

vrouter-interface-show

vrouter-ospf-add

vrouter-ospf-remove

vrouter-ospf-show

vrouter-ospf-neighbor-show

vrouter-rip-add

vrouter-rip-remove

vrouter-rip-show

vrouter-static-route-add

vrouter-static-route-remove

vrouter-static-route-show