vrouter-log-show

This command displays Quagga logs files, such as Zebra, OSPF, OSPF6, BGP, BFD and RIP can be viewed directly from the console using the Netvisor CLI.

Syntax   vrouter-log-show vrouter-name vrouter-name protocol zebra|ospf|ospf6|bgp|bfd|rip

vrouter-log-show

Shows vrouter protocol logs

one or more of the following options:

vrouter-name vrouter name

Specify the name of the vRouter.

protocol zebra|ospf|ospf6|bgp|bfd|rip

Specify the name of the protocol files you want to view.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None.

Access   CLI

History   Command introduced in Version 2.5.3.

Usage   Quagga logs files, such as Zebra, OSPF, OSPF6, BGP, BFD and RIP can be viewed directly from the console using the Netvisor

Examples  To display OSPF protocol logs from the vRouter named myrouter, use this command:

CLI network-admin@switch > vrouter-log-show vrouter-name myrouter protocol ospf

See Also