vrouter-loopback-interface-remove

This command removes a loopback address to a virtual router (vRouter) service for a fabric, cluster, virtual network (VNET), or standalone switch.

Syntax   vrouter-loopback-interface-add vrouter-name name-string index number 

vrouter-name name-string

Specify the name of the vRouter.

Specify the following loopback interface arguments:

index number 

Specify the interface index from 1 to 255.

Defaults   None.

Access   CLI.

History   Command introduced in Version 2.2.

Usage   Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks and implements Layer 3 protocols. This command removes a loopback interface from an existing Router service.

Examples  To remove the loopback interface of 192.168.11.13 to vRouter, MyvService, , use the following command:

CLI network-admin@switch > vrouter-loopback-interface-remove vrouter-name MyvService index 1

See Also   

vrouter-create

vrouter-delete

vrouter-migrate

vrouter-modify

vrouter-show

vrouter-bgp-add

vrouter-bgp-remove

vrouter-bgp-show

vrouter-igmp-static-join-add

vrouter-igmp-static-join-remove

vrouter-igmp-static-join-show

vrouter-interface-add

vrouter-interface-modify

vrouter-interface-remove

vrouter-interface-show

vrouter-ospf-remove

vrouter-ospf-show

vrouter-ospf-neighbor-show

vrouter-rip-add

vrouter-rip-remove

vrouter-rip-show

vrouter-static-route-add

vrouter-static-route-remove

vrouter-static-route-show