vrouter-loopback-interface-show

This command displays information about a loopback address added to a virtual router (vRouter) service for a fabric, cluster, virtual network (VNET), or standalone switch.

Syntax   vrouter-loopback-interface-show vrouter-name name-string index number ip-address 

vrouter-name name-string

Specify the name of the vRouter.

Specify the following loopback interface arguments:

index number 

Specify the interface index from 1 to 255.

ip-address

Specify the network IP address.

Defaults   None.

Access   CLI.

History   Command introduced in Version 2.2.

Usage   Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks and implements Layer 3 protocols. This command adds a loopback address for an existing vRouter service.

Examples  To add the loopback interface of 192.168.11.13 to vRouter, MyvService, , use the following command:

CLI network-admin@switch > vrouter-loopback-interface-show

vrouter-name           index       ip-address

------------           -----       --------------

MyvService             1           192.168.11.13

 

See Also   

vrouter-create

vrouter-delete

vrouter-migrate

vrouter-modify

vrouter-show

vrouter-bgp-add

vrouter-bgp-remove

vrouter-bgp-show

vrouter-igmp-static-join-add

vrouter-igmp-static-join-remove

vrouter-igmp-static-join-show

vrouter-interface-add

vrouter-interface-modify

vrouter-interface-remove

vrouter-interface-show

vrouter-ospf-remove

vrouter-ospf-show

vrouter-ospf-neighbor-show

vrouter-rip-add

vrouter-rip-remove

vrouter-rip-show

vrouter-static-route-add

vrouter-static-route-remove

vrouter-static-route-show