Virtual Router Multicast


This command is used to display multicast routes in forwarding information database.

Syntax   vrouter-mfib-routes-show

type <*,G>|<*,G,V>

Displays the type of hardware router.

srcip ip-address

Displays the source IP address.

srcip-mask netmask

Displays the source netmask.

group ip-address

Displays the group IP address.

group-mask netmask

Displays the group netmask.

vnet vnet-name 

Displays the VNET for the VLAN.

vlan vlan-id

Displays the VLAN identifier.

vrid vrouter-id

Displays the virtual router identifier.

hw-group-id hw-group-id

Displays the hardware group identifier.

send-vnet vnet-name

Displays the VNET of the sending VLAN.

send-vlan vlan-id

Displays the sending VLAN identifier.

ports port-list

Displays the port list.

encap-id encap-id-number

Displays the encapsulation identifier.

flags Trunk|Active

Displays the hardware flags for the route.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.


Display output in ascending order.


Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.


Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.


Display the number of entries in the output. This is useful with vRouter show commands.


Display full values in the output instead of scaled approximate values.


Display integer values instead of mapped values


Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   Command introduced in Version 2.2.5.

Version 2.2.5

Command introduced.

Version 2.4.1

The parameter, vnet, added.

Version 2.6.2

The parameter, send-vnet, added.

Usage   Use this command to display information about multicast routes in the forwarding information database (FIB).

Examples  To display multicast routes in the FIB, use the following syntax:

CLI network-admin@switch > vrouter-mfib-routes-show

switch:                        pleiades23

type:                          <S,G,V>



vlan:                          113

vrid:                          0

hw-group-id:                   2000006

send-vlan ports:               none

encap-id flags:                -1

flags:                         Active

switch:                        pleiades23

type:                          <S,G,V>



vlan:                          113

vrid:                          0

hw-group-id:                   2000007

send-vlan ports:               none

encap-id flags:                0

flags:                         Active

switch:                        pleiades23

type:                          <*,G,V>



vlan:                          115

vrid:                          0

hw-group-id:                   2000005

send-vlan ports:               none

encap-id flags:                1

flags:                         Active