vrouter-migrate

The command migrates a vRouter service.

Syntax   vrouter-migrate name name-string location fabric-node-name storage-pool storage-pool-name

name name-string

Specify the name of the vRouter.

Between one or two of the following options:

location fabric-node-name

Specify the location name.

storage-pool storage-pool-name

Specify the storage pool name.

Defaults   None.

Access   CLI.

History   Command introduced in nvOS Version 1.2.1.

Usage   Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks and implements Layer 3 protocols. This command migrates a vRouter service.

Examples  To migrate the vRouter service, MyvService, on fabric, pn-fabric, to the storage pool, keep-all, use the following command:

CLI network-admin@switch > vrouter-migrate name MyvService location pn-fabric storage-pool keep-all

See Also   

vrouter-create

vrouter-delete

vrouter-modify

vrouter-show

vrouter-bgp-add

vrouter-bgp-remove

vrouter-bgp-show

vrouter-igmp-static-join-add

vrouter-igmp-static-join-remove

vrouter-igmp-static-join-show

vrouter-interface-add

vrouter-interface-modify

vrouter-interface-remove

vrouter-interface-show

vrouter-ospf-add

vrouter-ospf-remove

vrouter-ospf-show

vrouter-ospf-neighbor-show

vrouter-rip-add

vrouter-rip-remove

vrouter-rip-show

vrouter-static-route-add

vrouter-static-route-remove

vrouter-static-route-show