This command is used to display multicast RIB routes in routing information database.

Syntax   vrouter-mrib-routes-show

type <*,G>|<*,G,V>

Displays the type of RIB route.

srcip ip-address

Displays the source IP address.

group ip-address

Displays the group IP address.

vlan vlan-id

Displays the VLAN identifier.

vrid vrouter-id

Displays the virtual router identifier.

hw-group-id hw-group-id

Displays the hardware group identifier.

vnic vnic-string

Displays the VNIC name.

vnic-vlan vnic-vlan-number

Displays the VLAN assigned to the VNIC.

ports port-list

Displays the ports.

flags in-hw

Displays the mRIB flags.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.


Display output in ascending order.


Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.


Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.


Display the number of entries in the output. This is useful with vRouter show commands.


Display full values in the output instead of scaled approximate values.


Display integer values instead of mapped values


Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   Command introduced in Version 2.4

Usage   Use this command to display information about multicast RIB routes in the forwarding information database (FIB).

Examples  To display multicast routes in the RIB, use the following syntax:

CLI network-admin@switch > vrouter-mrib-routes-show