vrouter-multicast-route-show

This command displays the multicast forwarding state for one more multicast routers or one or more multicast groups.

Syntax   vrouter-multicast-route-show vrouter-name name-string [source ip-address] [group ip-address] [parent parent-number] [oif_bitmap oif_bitmap-number] [incoming-if if-string] [outgoing-if if-string]

vrouter-name name-string

Displays the vRouter name.

source ip-address

Displays the source IP address.

group ip-address

Displays the group IP address.

parent parent-number

Displays the parent number.

oif_bitmap oif_bitmap-number

Displays the bitmap of virtual interfaces to forward packets.

incoming-if if-string

Displays the name of the incoming interface.

outgoing-if if-string

Displays the name of the outgoing interface.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   Command introduced in Version 2.2.5.

Usage   Use this command to display information about muticast routes.

Examples  To display multicast route information use the following syntax:

CLI network-admin@switch > vrouter-multicast-route-show

   vrouter-name source        group     incoming-if outgoing-ifs

   ------------ ------------- --------- ----------- ------------

   vr0          10.16.110.100 224.1.1.1 eth0.110    eth0.112

   vr1          10.16.110.100 224.1.1.1 eth1.112    eth0.114

  vr2          10.16.110.100 224.1.1.1 eth1.114    eth0.115