This command is used to display specific OSPF configuration information

Syntax   vrouter-ospf-interface-show


vrouter-name name-string

Displays the name of the vRouter.

Specify any of the following optional OSPF parameters:

nic vrouter interface nic

Displays the name of the vNIC.

nic-state down|up

Displays the vNIC state.

l3-port l3-port-number

Displays the Layer 3 port numbers.

ip ip-address

Displays the IP address of the interface.

netmask netmask

Displays the netmask of the IP address.

broadcast ip-address

Displays the broadcast IP address.

area ip-address

Displays the area ID for the interface in IPv4 format.

mtu mtu-number

Displays MTU for the interface.


Displays if MTU mismatch detection is configured.

router-id ip-address

Displays the router ID as an IP address.

network-type point-to-point|broadcast|loopback

Displays the OSPF network type.

state down|loopback|waiting|point-to-point|dr-other|backup|dr

Displays OSPF interface state.

dr-id ip-address

Displays the designated router ID.

dr-ip ip-address

Displays the designated router IP address.

bdr-id ip-address

Displays the backup designated router ID.

bdr-ip ip-address

Displays the designated router IP address.

priority priority-number

Displays the priority.

cost cost-number

Displays the cost.

hello hello-number(s)

Displays the hello-interval in seconds.

dead dead-number(s)

Displays the dead time in seconds.

retransmit retransmit-number(s)

Displays the retransmit interval time in seconds.

hello-due hello-due-string

Displays the hello due in.

neighbor neighbor-number

Displays the neighbor count.

adjacent adjacent-number

Displays the adjacent number count.




Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.


Display output in ascending order.


Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.


Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.


Display the number of entries in the output. This is useful with vRouter show commands.


Display full values in the output instead of scaled approximate values.


Display integer values instead of mapped values


Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 3.0.0.

Usage   Use this command to display statistics about a NAT configuration.

Examples  To display information about an OSPF interface, use the following syntax:

CLI network-admin@switch > vrouter-ospf-interface-show


See Also