vrouter-ospf6-add

This command adds Open Shortest Path First (OSPF6) routing protocol to a virtual router (vRouter) service for a fabric, cluster, virtual network (VNET), or standalone switch.

Syntax   vrouter-ospf6-add vrouter-name name-string [nic vrouter- interface-nic] ospf6-area ospf6-area-number

vrouter-name name-string

Specify the name of the vRouter.

Specify the following OSPF arguments:

nic vrouter- interface-nic

Specify the OSPF6 control for this interface.

ospf6-area ospf-area-number

Specify the OSPF6 area number in dotted decimal format.

Defaults   None.

Access   CLI.

History   Command introduced in Version 2.3.1.

Usage   Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks and implements Layer 3 protocols. This command adds OSPF for an existing Router service.

Examples  To add OSPF6 to vRouter, MyvService, with the NIC eth1.0, and OSPF6 area 1.0.0.0, use the following command:

CLI network-admin@switch > vrouter-ospf-add vrouter-name MyvService nic eth1.0 ospf6-area 1.0.0.0

See Also   

vrouter-create

vrouter-delete

vrouter-migrate

vrouter-modify

vrouter-show

vrouter-bgp-add

vrouter-bgp-remove

vrouter-bgp-show

vrouter-igmp-static-join-add

vrouter-igmp-static-join-remove

vrouter-igmp-static-join-show

vrouter-interface-add

vrouter-interface-modify

vrouter-interface-remove

vrouter-interface-show

vrouter-ospf-remove

vrouter-ospf-show

vrouter-ospf-neighbor-show

vrouter-rip-add

vrouter-rip-remove

vrouter-rip-show

vrouter-static-route-add

vrouter-static-route-remove

vrouter-static-route-show