vrouter-ospf6-neighbor-show

This command is used to display OSPF6 neighbors for a vRouter configured for OSPF6.

Syntax   vrouter-ospf6-neighbor-show vrouter-name name-string [neighbor-rid ip-address] [pri pri-number] [state state-string] [dead-time dead-time] [interface interface-string]

vrouter-name name-string

Specifies the name of the vRouter.

neighbor-rid ip-address

Specifies the IP address of the OSPF neighbor

pri pri-number

Specifies the priority.

state state-string

Specifies the current state of the OSPF neighbor.

dead-time dead-time

Specifies the dead-time. Dead-time is the interval of time that the vRouter waits before declaring a neighbor is down.

duration duration-string

Specifies the duration in hh:mm:ss.

interface interface-string

Specifies the interface on the vRouter.

Defaults   None.

Access   CLI

History   Command introduced in Version 2.3.1.

Usage   Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks and implements Layer 3 protocols. This command displays OSPF6 information for an existing Router service.

Examples  To display information about all OSPF6 neighbors on the network, use the following command:

CLI network-admin@switch > vrouter-ospf6-neighbor-show layout vertical

See Also   

vrouter-create

vrouter-delete

vrouter-migrate

vrouter-modify

vrouter-show

vrouter-bgp-add

vrouter-bgp-remove

vrouter-bgp-show

vrouter-igmp-static-join-add

vrouter-igmp-static-join-remove

vrouter-igmp-static-join-show

vrouter-interface-add

vrouter-interface-modify

vrouter-interface-remove

vrouter-interface-show

vrouter-ospf-add

vrouter-ospf-remove

vrouter-ospf-show

vrouter-rip-add

vrouter-rip-remove

vrouter-rip-show

vrouter-static-route-add

vrouter-static-route-remove

vrouter-static-route-show