vrouter-ospf6-remove

This command removes an Open Shortest Path First (OSPF6) routing protocol from a virtual router (vRouter) service for a fabric, cluster, virtual network (VNET), or standalone switch.

Syntax   vrouter-ospf6-remove vrouter-name name-string [nic vrouter- interface-nic]

vrouter-name name-string

Specify the name of the vRouter.

Specify the following OSPF arguments:

nic vrouter- interface-nic

Specify the OSPF6 control for this interface.

Defaults   None.

Access   CLI.

History   Command introduced in Version 2.3.1.

Usage   Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks and implements Layer 3 protocols. This command adds OSPF for an existing Router service.

Examples  To remove OSPF6 from vRouter, MyvService, with the NIC eth1.0, use the following command:

CLI network-admin@switch > vrouter-ospf-remove vrouter-name MyvService nic eth1.0

See Also   

vrouter-create

vrouter-delete

vrouter-migrate

vrouter-modify

vrouter-show

vrouter-bgp-add

vrouter-bgp-remove

vrouter-bgp-show

vrouter-igmp-static-join-add

vrouter-igmp-static-join-remove

vrouter-igmp-static-join-show

vrouter-interface-add

vrouter-interface-modify

vrouter-interface-remove

vrouter-interface-show

vrouter-ospf-remove

vrouter-ospf-show

vrouter-ospf-neighbor-show

vrouter-rip-add

vrouter-rip-remove

vrouter-rip-show

vrouter-static-route-add

vrouter-static-route-remove

vrouter-static-route-show