vrouter-pim-ssm-map-add

SSM mapping introduces a means for the last hop router to discover sources sending to groups. When SSM mapping is configured, if a router receives an IGMPv1 or IGMPv2 membership report for a particular group G, the router translates this report into one or more (S, G) channel memberships for the well-known sources associated with this group.

Syntax   vrouter-pim-ssm-map-add

vrouter-name name-string

Specify the name of the vRouter.

Add the following PIM-SIM arguments:

id id

Specify the ID as a number between 1 and 255.

group ip-address

Specify a group PIM-SIM range IP address. The default is 232.0.0.0

netmask netmask

Specify the netmask. The default is 8.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 3.0.0.

Usage   Use this command to configure mapping for PIM-SSM.

Examples  To map a group IP address, use the following syntax:

CLI network-admin@switch > vrouter-pim-ssm-map-add vrouter-name vr1 id 101 group 233.0.0.0/8

vrouter-pim-ssm-map-remove

This command removes mapping for PIM-SSM group IP addresses.

Syntax   vrouter-pim-ssm-map-remove

vrouter-name name-string

Specify the name of the vRouter.

Add the following PIM-SIM arguments:

id id

Specify the ID as a number between 1 and 255.

group ip-address

Specify a group PIM-SIM range IP address. The default is 232.0.0.0

netmask netmask

Specify the netmask. The default is 8.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 3.0.0.

Usage   Use this command to remove mapping for PIM-SIM.

Examples  To remove a group IP address, use the following syntax:

CLI network-admin@switch > vrouter-pim-ssm-map-remove vrouter-name vr1 id 101 group 233.0.0.0/8

vrouter-pim-ssm-map-show

This command displays mapping for PIM-SSM group IP addresses.

Syntax   vrouter-pim-ssm-map-show

vrouter-name name-string

Displays the name of the vRouter.

Add the following PIM-SIM arguments:

id id

Specify the ID as a number between 1 and 255.

group ip-address

Displays a group PIM-SIM range IP address. The default is 232.0.0.0

netmask netmask

Displays the netmask. The default is 8.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 3.0.0.

Usage   Use this command to display mapping for PIM-SSM.

Examples  To display mapping, use the following syntax:

CLI network-admin@switch > vrouter-pim-ssm-mapping-show vrouter-name vr1 id 101 group 233.0.0.0/8

vrouter-name id group

------------ -- -----------

VR0          0  232.0.0.0/8

VR0          1  233.0.0.0/8