Virtual Routing and RIP

vrouter-rip-add

This command adds Routing Information Protocol (RIP) to a virtual router (vRouter) service on a fabric, cluster, virtual network (VNET), or standalone switch.

Syntax   vrouter-rip-add vrouter-name name-string network ip-address netmask netmask 

vrouter-name name-string

Specify the name of the vRouter service.

network ip-address

Specify the IP address.

netmask netmask

Specify the netmask of the IP address.

Defaults   None.

Access   CLI.

History   Command introduced in nvOS Version 1.2.1.

Usage   Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks and implements Layer 3 protocols. This command displays adds RIP to an existing Router service.

Examples  To add RIP with an IP address of 172.16.0.0/16 to the vRouter service, MyvService, use the following command:

CLI network-admin@switch > vrouter-rip-add vrouter-name MyvService network 172.16.0.0/16

See Also   

vrouter-create

vrouter-delete

vrouter-migrate

vrouter-modify

vrouter-show

vrouter-bgp-add

vrouter-bgp-remove

vrouter-bgp-show

vrouter-igmp-static-join-add

vrouter-igmp-static-join-remove

vrouter-igmp-static-join-show

vrouter-interface-add

vrouter-interface-modify

vrouter-interface-remove

vrouter-interface-show

vrouter-ospf-add

vrouter-ospf-remove

vrouter-ospf-show

vrouter-ospf-neighbor-show

vrouter-rip-remove

vrouter-rip-show

vrouter-static-route-add

vrouter-static-route-remove

vrouter-static-route-show