vrouter-rip-remove

This command removes a RIP instance from a vRouter service on a fabric, cluster, virtual network (VNET), or standalone switch.

Syntax   vrouter-rip-remove vrouter-name name-string network ip-address 

vrouter-name name-string

Specify the name of the vRouter service.

network ip-address

Specify the IP address.

Defaults   None.

Access   CLI

History   Command introduced in nvOS Version 1.2.1.

Usage   Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks and implements Layer 3 protocols. This command removes a RIP instance on an existing Router service.

Examples  To remove RIP with an IP address of 172.16.0.0/16 from the vRouter service, MyvService, use the following command:

CLI network-admin@switch > vrouter-rip-remove vrouter-name MyvService network 172.16.0.0

See Also   

vrouter-create

vrouter-delete

vrouter-migrate

vrouter-modify

vrouter-show

vrouter-bgp-add

vrouter-bgp-remove

vrouter-bgp-show

vrouter-igmp-static-join-add

vrouter-igmp-static-join-remove

vrouter-igmp-static-join-show

vrouter-interface-add

vrouter-interface-modify

vrouter-interface-remove

vrouter-interface-show

vrouter-ospf-add

vrouter-ospf-remove

vrouter-ospf-show

vrouter-ospf-neighbor-show

vrouter-rip-add

vrouter-rip-show

vrouter-static-route-add

vrouter-static-route-remove

vrouter-static-route-show