vrouter-routes-stats-show

This command is used to display statistical information about all routes on one or all configured vRouters.

Syntax   vrouter-routes-stats-show vrouter-name name-string 

vrouter-name name-string

Specifies the name of a vRouter.

fib-max-routes fib-max-routes-number

Specifies the maximum number of routes in the Forwarding Information Database.

fib-current-routes fib-current-routes-number

Specifies the number of current routes in the Forwarding Information Database.

rib-current-routes rib-current-routes-number

Specifies the number of current routes in the Routing Information Database

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

 

Defaults   None

Access   CLI

History   Command introduced in Version 2.3.3.

Usage   Use this command to identify routes on vRouters configured on the switch.

Examples  To display all route information for all vRouters, use the following command:

CLI network-admin@switch > vrouter-routes-stats-show

vrouter-name network       type        interface

------------ ------------- ---------   ---------------

vr-ext-50    10.121.1.0/24 connected   ext.50.mgr.eth0

vr-ext-50    10.111.1.0/24 rip         ext.50.mgr.eth0

vr-ext-50    127.0.0.0/8   connected   lo0             

vr-www-51    10.121.1.0/24 connected   www.51.mgr.eth1

vr-www-51    10.111.1.0/24 connected   www.51.mgr.eth0

vr-www-51    127.0.0.0/8   connected   lo0