This command allows you to display information about multicast routes on a vRouter configured on the switch.

Syntax   vrouter-routes-multicast-show g

vrouter-name name-string

Specifies the vRouter name.

source ip-address

Specifies the source IP address.

group ip-address

Specifies the IP address of the group.

proto rip|connected|static|ospf|bgp|missing|

Specifies the protocol used by the routes.

input input-string

Specifies the input interface for incoming routes.

iVifI iVifI-number

Specifies the input index for on a virtual interface (VNIC).

output output-string

Specifies the output interface for an outgoing routes.

oVifI oVifI-number

Specifies the output index for a virtual interface (VNIC).

ttl ttl-number

Specifies the time-to-live (TTL) value.

uptime uptime-string

Specifies the uptime for the route.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.


Display output in ascending order.


Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.


Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.


Display the number of entries in the output. This is useful with vRouter show commands.


Display full values in the output instead of scaled approximate values.


Display integer values instead of mapped values


Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   Command introduced in nvOS Version 1.2.1

Usage   You can display information about the multicast routes on a vRouter.

Examples  To display multicast route information, use the following command:

vrouter-routes-multicast-show layout vertical

vrouter-name:              vr1



proto:                     vr1.eth0

iVifI:                     2

output:                    vr1.eth1

oVifI:                     3

ttl:                       1

uptime:                    00:00:01