Virtual Router and Traceroute

vrouter-traceroute

This command is used to identify routing from a vRouter on the network.

Syntax   vrouter-traceroute

vrouter-name vrouter-name

Specify the name of the vRouter service.

host-ip ip-address

Specify the IP address of the host.

Specify between 0 and 3 of the following options:

resolve|no-resolve

Specify if you want to display IP addresses as host names in the output.

src-ip ip-address

Specify if you want to select an alternative source address.

probe-type icmp-probe|udp-probe

Specify the type of probe used in the traceroute function.

outgoing-interface outgoing-interface-string

Specify the outgoing interface to ping.

Defaults   None

Access   CLi

History   

Version 2.3.1

Command introduced.

Version 2.6.2

The parameter, outgoing-interface, added.

Usage   Use this command to identify routes on the network between a vRouter and a host.

Examples  To perform a traceroute between vRouter, vr-1, and host IP address, 192.168.11.134, use the following syntax:

CLI network-admin@switch > vrouter-traceroute vrouter-name vr-1 host-ip 192.168.11.134