Was this helpful?
Supported Traps
 
Trap Name
Description
Trap Type
Trigger
link-up-down
Port link is up or down.
Event-based
If enabled, SNMP generates a trap when a port is up or down.
default-monitors
Use default SNMP monitoring.
 
 
physical-sensors
Physical sensors are enabled.
 
If enabled, SNMP generates a trap for physical sensors such as power supplies and fans.
low-disk-space
Monitors for low-disk-space.
Event-based
If enabled, SNMP generates a trap if disk space is lower than threshold. SNMP checks the output of the command, storage-pool-show.
low-disk-space-threshold
The threshold value of low-disk-space in %.
Event-based
SNMP generates the trap with low-disk-space.
system-usage
Monitors memory & CPU usage.
Event-based
If enabled, SNMP generates a trap if system-usage[Total CPU-sys + user] space is greater than threshold. SNMP checks the output of the command, "system-stats-show"
system-usage-threshold
system-usage-threshold
 
SNMP generates the system usage trap.
login-failure
Monitors login failures.
Message-based
If enabled, SNMP generates a trap when user login with wrong password.
lacp-status
Monitors LACP enable or disable.
Message-based
If enabled, SNMP generates a trap when the LACP state changes from enable to disabled or disabled to enable.
vport-modified
Monitors vPort modifications.
Message-based
If enabled, SNMP generates a trap when vPort modifications occur on the switch.
stp-port-modified
Monitors STP port status.
Message-based
If enabled, SNMP generates a trap when STP port state is modified using the command, switch-local stp-port-modify port 1 <block|edge|bpdu|
root-guard>
stp-port-state-failed
Monitors STP port state failures.
Message-based
If enabled, SNMP generates a trap when STP port state is modified using the command, switch-local stp-port-modify port 128 edge bpdu-guard
mirror-to-cpu
Monitors mirror-to-cpu configuration.
Message-based
If enabled, SNMP generates a trap when created a vlflow using the command,
vflow-create name mirror scope local action copy-to-cpu and also generates a trap for perror.log.
link-congestion-detected
Monitors congestion drop at port.
Message-based
If enabled, SNMP generates a trap indicating a link is congested.
fabric-node-state-changed
Monitors fabric node states.
Message-based
If enabled, SNMP generates a trap when the a fabric node changes state.
stp-new-root
Monitors new STP root.
Event-based
If enabled, SNMP generates a trap to monitor a new root for STP.
stp-topology-changed
Monitors STP topology change
Event-based
If enabled, SNMP generates a trap to monitor topology changes for STP.
interface-up-down
Monitors vRouter interfaces.
Event-based
If enabled, SNMP generates a trap for an interface with the state up or down.
disable-start-stop
Monitors disable traps for start and stop.
Event-based
 
fabric-node-state-changed
Monitors fabric node states.
Event-based
If enabled, SNMP generates a trap to monitor fabric node state changes.
system-usage
Monitors memory & cpu usage.
Event-based
If enabled, SNMP generates a trap to monitor memory and CPU changes.
vrrp-new-master
Monitors VRRP master changes.
Event-based
If enabled, SNMP generates a trap to monitor VRRP master state changes.