Support for Route Maps for OSPF Routes
Configure route maps to associate a redistribute metric or metric-type for OSPFv3 and currently, you cannot configure metrics for OSPF. In this release, you can now define a route map to prevent OSPF routes from getting added to the routing table. This filtering happens at the moment when OSPF installs the route in the routing table.
Before you configure route maps, configure a list of prefixes using the following command:
CLI network-admin@Leaf1 > vrouter-prefix-list-add
 
Use the following set of commands to configure route maps for OSPF:
CLI network-admin@Leaf1 > vrouter-route-map-add
 
vrouter-name name-string
Specify the name of the vRouter service.
name name-string
Specify the name for the route map.
seq integer
Specify the sequence number as an integer between 1 and 4294967295.
action permit|deny
Specify the route map action as permit or deny.
match-prefix vrouter prefix-list name-string
Specify the name of the prefix list used for the route map.
community-attribute unset|none|no-export|no-advertise|
internet|local-AS
Specify the community attribute for the route map.
local-pref integer
Specify the local preference as an integer between -1 and 4294967295.
metric none
Specify the metric as none.
metric-type 1|2
Specify the metric type as 1 or 2.
 
CLI network-admin@Leaf1 > vrouter-route-map-remove
 
vrouter-name name-string
Specify the name of the vRouter service.
name name-string
Specify the name for the route map.
seq integer
Specify the sequence number as an integer between 1 and 4294967295.
CLI network-admin@Leaf1 > vrouter-route-map-show
 
vrouter-name name-string
Displays the name of the vRouter service.
name name-string
Displays the name for the route map.
seq integer
Displays the sequence number as an integer between 1 and 4294967295.
action permit|deny
Displays the route map action as permit or deny.
match-prefix vrouter prefix-list name-string
Displays the name of the prefix list used for the route map.
community-attribute unset|none|no-export|no-advertise|
internet|local-AS
Displays the community attribute for the route map.
local-pref integer
Displays the local preference as an integer between -1 and 4294967295.
metric none
Displays the metric as none.
metric-type 1|2
Displays the metric type as 1 or 2.