Configuring Layer 3 Features > > Displaying Hardware Routes History
Was this helpful?
Displaying Hardware Routes History
You can display the history of hardware routes in the RIB table. This becomes useful when troubleshooting hardware routing on the network.
CLI (network-admin@spine1)>vrouter-rib-history-show time 15:30
 
time caller reason ip prelen nexthop flags vlan intf_ip intf_id
-------- --------- ------ ----------- ------ ----------- ------------------ ---- ----------- ---
15:29:41 router-if add 10.16.111.0  24 10.16.111.1 in-hw,local-subnet 111 10.16.111.1
15:29:43 router-if add   10.16.100.0  24    10.16.100.1 in-hw,local-subnet 100 10.16.100.1 1
 
You can also modify the settings for collecting the history:
CLI (network-admin@spine1)>vrouter-rib-history-settings-modify