Configuring Layer 3 Features > Layer 3 Table Validation
Was this helpful?
Layer 3 Table Validation
Layer 3 entries can become unsynchronized between the software table and the hardware table when you modify routes while the routes update on the network. This feature adds parameters to the l3-setting-modify command to automatically check Layer 3 entries:
CLI network-admin@switch > l3-setting-modify
one or more of the following options:
aging-time seconds
Specify the aging-time for Layer 3 entries, use 0 to disable aging.
convergence-time seconds
Specify the unicast convergence time on bootup (seconds)
Specify if you want to check Layer 3 consistency
l3-checker-interval duration: #d#h#m#
Specify the interval for Layer 3 consistency checker
Enable fixing of inconsistent entries
Nevisor uses two commands to manually check and fix Layer 3 inconsistencies:
CLI network-admin@switch > l3-check-fix
CLI network-admin@switch > l3-check-show