Displaying Multiple Objects for Show Commands


In previous versions of software, Netvisor One could not display multiple objects for show commands. Netvisor One displayed either one object or all objects in show output. For example, the show command, vflow-show, displayed all vFlows or just one specified vFlow.


Now, you can specify multiple objects to display. For example, for vflow-show, you can specify which vFlows to display:


CLI (network-admin@Leaf1) >  vflow-show name [TAB]


Internal-Keepalive      

System-S                

System-F                

System-R                

System-VLE-S            

System-VLE-F            

System-VLE-R            

VIRT_WIRE_MAS_SLV_17_19

VIRT_WIRE_SLV_MAS_19_17

VIRT_WIRE_MAS_SLV_18_20

VIRT_WIRE_MAS_SLV_20_18

 

Now you can specify the vFlows to display:


CLI (network-admin@Leaf1) >  vflow-show name System-S,System-R


switch   name     scope type   proto tcp-flags precedence action      action-to-ports-value enable

-------- -------- ----- ------ ----- --------- ---------- ----------- --------------------- ------

dorado05 System-S local system tcp   syn       default    copy-to-cpu none                  enable

dorado05 System-R local system tcp   rst       default    copy-to-cpu none                  enable

 

cpu-class-show name arp,dhcp,l3-miss

 switch   name    scope rate-limit hog-protect hog-protect-support queue

 -------- ------- ----- ---------- ----------- ------------------- -----

Leaf1    arp     local 1000       disable     supported           21    

Leaf1    dhcp    local 1000       disable     none                24    

 Leaf1    l3-miss local 1000       disable     none                10