Setting the Date and Time


To set the date and time on the switch, modify the switch configuration using the switch-setup-modify command.


To change the date and time to December 25, 2017, 12:00:00, use the following syntax:

CLI (network-admin@Leaf1) > switch-setup-modify date 2017-12-25T12:00:00

To display the configured settings, use the switch-setup-show command:

CLI (network-admin@Leaf1) > switch-setup-show

switch-name:         switch

mgmt-ip:             10.9.11.211/16

mgmt-ip6:            fe80::3617:ebff:fef6:e2c4/64

mgmt-link-state:     up

mgmt-link-speed:     1g

in-band-ip:          10.9.11.213/16

gateway-ip:          10.14.2.1

gateway-ip6:         2001:1000:1111:2222:3333:abcd:1000:2

dns-ip:              10.20.4.1

dns-secondary-ip:    10.20.40.1

domain-name:         pluribusnetworks.com

ntp-server:          0.ubuntu.pool.ntp.org

timezone:            America/Los_Angeles

date:                2017-12-25,01:06:47

phone-home:          yes

hostid:              184551447

location-id:         1

analytics-store:     default

enable-host-ports:   yes

banner:

 

The analytics-store parameter refers to the storage location for analytics which in this case is the hard drive on the switch.


External hard drives currently are not supported for Netvisor One.