Click Launch Playbook to select the desired configuration playbook.
Click Next to continue.
Each Playbook will contain specific configuration parameters which you will need to provide.
UNUM Platform Global - Add Fabric Select Playbook
Example of L2 VRRP configuration screens.
UNUM Platform Global - Add Fabric Playbook Setting
Sample CSV files are available for download for each Playbook.
You manually enter configuration settings or upload a CSV file using Manual Input or Upload CSV.
A sample CSV file is available for download by selecting Sample CSV | Download.
During manual input of ZTP VRRP configurations, you select from a list of switches from the drop-down menu.
The drop-down menu lists all switches in the Fabric, however in specific cases, not all switches are applicable.
Please follow the Playbook guidelines listed below:
- The L2 VRRP Playbook supports VRRP between spines only.
- The L3 BGP and L3 OSPF Playbooks support VRRP between leaves only.
- The L2 VRRP 3rd Party Spines Playbook, neither are supported.
- The L3 BGP and L3 OSPF 3rd Party Spines Playbook supports leaves only.
UNUM Platform Global - Add Fabric Playbook Setting Manual Input
Click Add+ to enter your configuration parameters.
UNUM Platform Global - Add Fabric Manual Input Parameters
Enter the IP address with a valid CIDR subnet mask for the VRRP, the ID number for the VLAN and the Switch Name.
Click Add+ to enter additional configuration parameters until your configuration is complete.
Click Save to continue.
When the Playbook configuration parameters are correctly entered click Add and the Playbook execution begins.
UNUM Platform Global - Playbook Running
Various messages may appear during the Playbook execution and icons animations will appear on the dashboard indicating progress with the Playbook configuration.
Once the Playbook scenario has been successfully deployed you will see the following message:
UNUM Platform Global - Playbook Successfully Deployed
Click Close to complete the configuration.