Security/Monitoring SNMP V3 Trap Sinks


SNMP V3 Trap Sinks


Selecting Overview → Manage → Security/Monitoring → SNMP V3 Trap Sinks displays the SNMP V3 Trap Sinks dashboard with a list of any existing SNMP V3 Trap Sinks settings.


Select the desired Fabric from the left side navigation bar and the dashboard updates showing all SNMP V3 Trap Sink entries from all switches within the Fabric.


Note: If no entries exist a "No Data Exists" message is displayed. You must first configure an entry on a switch. Prerequisite settings and configuration may be required.



The dashboard displays a list of existing SNMP V3 Trap Sink entries by Switch name. Additional parameters include: Username, Destination Host, Type and Destination Port.


You sort the list of entries in the dashboard using the up / down  arrows above each of the columns to sort the information as needed.




Manage Security/Monitoring SNMP V3 Trap Sinks Fabric Dashboard


Select the desired switch from the Fabric and the dashboard displays a list of existing SNMP V3 Trap Sink entries by User Name.


Additional parameters include: Destination Host, Type and Destination Port.


Manage Security/Monitoring SNMP V3 Trap Sinks Dashboard


You sort the list of entries in the dashboard using the up / down  arrows above each of the columns to sort the information as needed.


To obtain detailed information about a SNMP V3 Trap Sinks select an entry in the dashboard.


A Details pane opens displaying the configuration information of the SNMP V3 Trap Sinks.


Scroll through the list, as needed, and click X to return to the dashboard.


Manage Security/Monitoring SNMP V3 Trap Sinks Details


SNMP V3 Trap Sinks are added by selecting Create a SNMPv3 trap receiver .


Manage Security/Monitoring Create SNMP V3 Trap Receiver


To add a SNMP V3 Trap Sink click Create SNMPv3 trap receivers and enter the configuration parameters which include:


  • user-name – (required) username
  • dest-host – destination host
  • type – SNMP Trap Type -  TRAP_TYPE_V3_TRAP or TRAP_TYPE_V3_INFORM
  • dest-port – destination port – specify 10162


Click Save to continue or Cancel to return to the previous screen without saving any changes.


The new SNMP V3 Trap Sink is added to the Dashboard.


Manage Security/Monitoring Create SNMP V3 Trap Receiver Added to Dashboard


To delete a SNMP V3 Trap Sink use Delete by selecting the Cog  icon. A confirmation message requires an acknowledgment to continue deletion.


Manage Security/Monitoring SNMP V3 Trap Sinks Delete Confirmation


Click OK to continue or Cancel to return to the previous screen without making any changes.