Layer 3 Configuration – Host Routes

Host Routes

Selecting Manager → Layer 3 → Host Routes displays the Host Routes dashboard with a list of any existing Host Route settings.

UNUM provides access to specific feature help documentation via the Help Button  icon.


Select the desired Fabric from the left side navigation bar and the dashboard updates showing all Host Route entries from all switches within the Fabric.


Note: If no entries exist a "No Data Exists" message is displayed. You must first configure an entry on a switch. Prerequisite settings and configuration may be required.



The dashboard displays a list of existing Host Route entries by Switch. Additional parameters include: vrid, IP, ports, VLAN, MAC and flags.


You sort the list of entries in the dashboard using the up / down  arrows above each of the columns to sort the information as needed.



Manager Layer 3 Host Routes Fabric Dashboard


Select the desired switch from the fabric and the dashboard updates automatically with Host Route settings.


The dashboard displays a list of existing Host Route entries by vrid (virtual router pair). Additional parameters include: IP, ports, VLAN, MAC and flags.


You sort the list of entries in the dashboard using the up / down  arrows above each of the columns to sort the information as needed.


Manager Layer 3 Host Routes Switch Dashboard


To obtain detailed information about Host Routes click an entry in the dashboard.

A Details pane opens displaying the configuration information of the host route.

Scroll through the list, as needed, and click X to return to the dashboard.


Manager Layer 3 vRouter Host Routes Switch Details