Pluribus UNUM 6.3.1

Before you Begin

Before you begin, please refer to the following sections regarding settings and licensing.

UNUM Day-0 ONIE Switch Provisioning Prerequisites

If you are using UNUM’s automation to install the Netvisor ONE operating system onto bare metal switches, you will need to gather several pieces of information:

1)The applicable switch names.

2)The applicable switch management IPs.

3)Switch MAC addresses – found on the Dell switch label.

4)Switch device IDs – found on the Dell switch label.

5)Console connection information for the switches. While it is technically possible to provision switches without a console connection, we highly recommended all switches have one for troubleshooting purposes.

The switch names and IP scheme will be needed even if the automated ONIE install process isn’t used.

For example, below is a table with the information we’ll be using to build our fabrics:

Table - Host Information for ONIE Switch Provisioning

Our UNUM IP address is 10.13.35.132.

UNUM and Netvisor ONE Licensing

Before creating a fabric, install UNUM and activate licenses for both UNUM and individual switches. Activate these licenses through the Pluribus Networks Cloud or PNCloud.

The PNCloud is simply a portal for downloading software and activating licenses and is accessible through our customer portal. New customers will receive an e-mail with credentials and login instructions.

While a detailed walk-through of license activation is outside the scope of this document, please refer to the appropriate sections of the UNUM Installation and Configuration guide below.

1)Installing UNUM.

2)Activate UNUM Licenses.

3)Activate Switch Licenses. This link opens an introductory video to the PNCloud and switch license activation. 

Once UNUM is installed, it is accessed by typing the management IP address into a browser window. Chrome or Firefox are recommended browsers.