Changing Switch Setup Parameters


You can modify the following switch parameters by using the switch-setup-modify command:

  • Switch name
  • Management IPv4 and IPv6 addresses
  • Management IPv4 and IPv6 netmasks
  • Management IPv4 and IPv6 address assignments
  • In-band IPv4 address
  • In-band netmask
  • Gateway IPv4 address
  • Gateway IPv6 address
  • Primary and secondary IPv4 addresses for DNS services
  • Domain name
  • NTP server
  • End User License Agreement (EULA) acceptance and timestamp
  • Password
  • Date
  • Analytics store (storage type)
  • Message of the Day (MOTD)
  • Banner

For example if you want to change the date and time on the switch, use the command:


CLI (network-admin@switch-1) > switch-setup-modify date 2019-08-05 T04:30:00


To view the changed date (see bold in output), use the show command:


CLI (network-admin@Leaf1) > switch-setup-show

switch-name:                        plu005swl01

mgmt-ip:                                10.80.241.235/25

mgmt-ip-assignment:        static

mgmt-ip6:                        2001:aaaa::10:80:241:235/112

mgmt-ip6-assignment:        static

in-band-ip:                        192.168.241.235/24

in-band-ip6:                        fe80::640e:94ff:fe3f:fafc/64

in-band-ip6-assign:        autoconf

gateway-ip:                        10.80.241.129

gateway-ip6:                        2001:aaaa::10:80:241:ffff

dns-ip:                                10.80.241.94

dns-secondary-ip:                10.80.241.98

domain-name:                        pluribusnetworks.com

ntp-server:                        10.80.241.94

timezone:                        America/Los_Angeles

date:                                2019-08-05,04:30:00

analytics-store:                default

enable-host-ports:                yes

banner:                                * S2L CONVERSION SETUP ERIC05 *