Enabling sFlow on the Network


You must configure and enable sFlow on each switch that you want to use for monitoring network traffic. You can only configure one sFlow per switch.

 

On each switch in the example diagram, use the following command to enable sFlow, net-monitor, on ingress ports 57-59, sample type raw, sample-rate 4096, sample interval 5 seconds, trunc-length 160 bytes, on VLAN 200:


CLI (network-admin@Leaf1) >  sflow-create name net-monitor sample-type raw ports 57-59 sample-rate 4096 trunc-length 160 vlan 200