control-stats-setting-modify

This command is used to modify the settings to collect statistics about packets sent from the CPU.

Syntax   control-stats-settings-modify enable|disable interval duration: #d#h#m#s disk-space disk-space-number

enable|disable

Specify to enable or disable statistic collection.

interval duration: #d#h#m#s

Specify the intervals to collect statistics.

disk-space disk-space-number

Specify the disk space to allocate to the statistics.

Defaults   None

Access   CLI

History   Introduced in Version 2.0.

Usage   You can use this command to modify how packets statistics are collected.

Examples  To disable statistic collection, use the following command:

CLI network-admin@switch > control-stats-settings-modify disable

control-stats-setting-show

This command is used to display the settings for collecting statistics about packets sent from the CPU.

Syntax   control-stats-settings-show

Defaults   None

Access   CLI

History   Introduced in Version 2.0.

Usage   You can use this command to display how packets statistics are collected.

Examples  To disable statistic collection, use the following command:

CLI network-admin@switch > control-stats-settings-show

switch:     pubdev01

enable:     yes

interval:   1m

disk-space: 50M

switch:     pubdev03

enable:     yes

interval:   1m

disk-space: 50M

switch:     pubdev02

enable:     yes

interval:   1m

disk-space: 50M


control-stats-show

This command is used to display the packet counts sent from the CPU.

Syntax   control-stats-show

time date/time: yyyy-mm-ddThh:mm:ss

Specify the timestamp of the statistics that you want to display.

start-time date/time: yyyy-mm-ddThh:mm:ss

Specify the start time for the statistics that you want to display.

end-time date/time: yyyy-mm-ddThh:mm:ss

Specify the end time for the statistics that you want to display.

duration duration: #d#h#m#s

Specify the duration of the statistics that you want to display.

interval duration: #d#h#m#s

Specify the interval between the statistics that you want to display.

since-start

Specify a start time for the statistics.

older-than duration: #d#h#m#s

Specify a duration that is older than a specified time.

within-last duration: #d#h#m#s

Specify a duration window for a specified time.

caller Unknown|Total|Vxlan|Vle

Specify the caller for the specific statistics. Total is displayed by default.

Defaults   None

Access   CLI

History   

Version 2.0

Command introduced.

Version 2.1

The options, CPU-RX-TX|VLAG|BCAST|Flood, added to the parameter, caller.

Version 2.2

The parameters, older-than and within-last, added. The parameters, |ARP|Vxlan-ARP|Vxlan-multicast|Vxlan-TCP|Vxlan-encap|Vxlan|Discovery|Keep-Alive|ECP| ICMP|IGMP|LLDP|LACP|
Logical-switch|PTP|STP|PVST|nvOS-control|Local-subnet|Ipv6-mc|TCP-conn|RX-queue|NAT-Dynamic|CPU-RX-TX|VLAG|BCAST|Flood] deprecated.

Version 2.4.0

The option, Vxlan, added to the parameter, caller.

Version 2.6.2

The option, Vle, added to the parameter, caller.

Usage   You can use this command to display how many packets the operating system is sending out and how many packets were dropped. This can be helpful when debugging or troubleshooting problems on the network.

Examples  To display control stats for a duration of three days and an interval of one day, use the following command:

CLI network-admin@switch > control-stats-show duration 03:00:00 interval 01:00:00 format all layout vertical

switch:             pubdev03

caller:             Total

ipkts:              1.80M

ibytes:             458M

idrops:             5

idrop-bytes:        300

idrops-err:         0

opkts:              1.87M

obytes:             395M

odrops:             29.7K

odrop-bytes:        1.51M

switch:             pubdev02

caller:             Total

ipkts:              978K

ibytes:             434M

idrops:             8

idrop-bytes:        490

idrops-err:         0

opkts:              1.53M

obytes:             399M

odrops:             53.4K

odrop-bytes:        15.2M

switch:             pubdev01

caller:             Total

ipkts:              1.86M

ibytes:             499M

idrops:             13

idrop-bytes:        780

idrops-err:         0

opkts:              2.33M

obytes:             454M

odrops:             89.0K

odrop-bytes:        15.0M

control-traffic-modify

This command is used to modify the control traffic on the switch.

Syntax   control-traffic-modify

type smac-miss|dmac-miss|l3-miss|l3-ttl

Specify the type of control traffic.

class vflow-class-name

Specify the vFlow class name.

cpu_class cpu-class name

Specify the CPU class name.

Defaults   None

Access   CLI

History   .

Version 2.4.0

Command introduced.

Version 2.6.0

The parameter, smac-miss, added.

Version 2.6.2

The parameter, cpu_class, added.

Usage   You can use this command to update the control traffic configuration.

Examples  To modify control traffic, use the following command:

CLI network-admin@switch > control-traffic-modify type

control-traffic-show

This command is used to display the control traffic configuration on the switch.

Syntax   control-traffic-show

type smac-miss|dmac-miss|l3-miss|l3-ttl

Specify the type of control traffic.

class vflow-class-name

Specify the start time for the statistics that you want to display.

cpu_class cpu-class name

Specify the CPU class name.

Defaults   None

Access   CLI

History   .

Version 2.4.0

Command introduced.

Version 2.6.0

The parameter, smac-miss, added.

Version 2.6.2

The parameter, cpu_class, added.

Usage   You can use this command to display the control traffic configuration.

Examples  To display control traffic, use the following command:

CLI network-admin@switch > control-traffic-show

switch        type      class  

------------- --------- ------

aquila-ext-43 smac-miss class1

aquila-ext-43 dmac-miss class0

aquila-ext-43 l3-miss   class0

aquila-ext-43 l3-ttl    class0