lacp-modify

This command is used to modify Link Aggregation Control Protocol (LACP) parameters on the switch.

Syntax   lacp-modify 

Specify one or more of the following options:

enable|disable

Specify to enable or disable LACP on the switch.

system-priority priority

Specifies the priority for the configuration. The default value is 32768 with a range of 1 to 65535.

Defaults   The default system-priority is 32768.

Access   CLI

History   Command introduced in Version 1.2.6

Usage   Use this command to enable or disable LACP and set the priority.

Examples  To enable LACP with a priority of 3567, use the following command:

CLI (network-admin@switch)> lacp-modify enable system-priority 3576

lacp-show

This command is used to display information about Link Aggregation Control Protocol (LACP) configurations on the switch.

Syntax   lacp-show

switch switch-name

Specifies the name of the switch in the configuration.

enable|disable

Specifies if LACP is enabled or disabled.

system-priority priority

Specifies the priority for the configuration. The default value is 32768 with a range of 1 to 65535.

system-id id-string

Specifies the ID of the switch in the configuration. LACP uses the system priority with the MAC address to form the system ID and also during negotiation with other systems.

Defaults   None

Access   CLI

History   Command introduced in Version 1.2

Usage   Use this command to display information about the LACP configuration.

Examples  To display LACP information, use the following syntax

CLI network-admin@switch > lacp-show

switch:              pleiades24

enable:              yes

system-priority:     32768

systemid:800640e942c007a

switch:              pleiades32

enable:              yes

system-priority:     32768

systemid:800640e942c0143

lacp-port-stats-settings-modify

This command is used to modify the settings for LACP port statistics.

Syntax   lacp-port-stats-settings-modify


enable|disable

Specify if you want to enable or disable LACP port statistics.

interval duration: #d#h#m#s

Specify the interval between statistics collection.

disk-space disk-space-number

Specify the amount of disk space for the statistics.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 2.6.0.

Usage   Use this command to display settings for LACP port statistics collection.

Examples  To modify settings for LACP port statistics and disable statistics collection, use the following syntax:

CLI network-admin@switch > lacp-port-stats-settings-modify disable

lacp-port-stats-settings-show

Syntax   lacp-port-stats-settings-show

Defaults   None

Access   Network Administrator

History   Command introduced in Version 2.6.0.

Usage   Use this command to display LACP port statistics settings.

Examples  To display settings for LACP port statistics, use the following syntax:

CLI network-admin@switch > lacp-port-stats-settings-show

switch:     Leaf-1

enable:     yes

interval:   1m

disk-space: 50M


lldp-show

This command is used to display Link Layer Discovery Protocol (LLDP) information on the switch. Link Layer Discovery Protocol (LLDP) allows Ethernet network devices such as switches and routers to receive and transmit device-related information to directly connected devices on the network that are also using the protocols, and to store the information that is learned about other devices.

Syntax   lldp-show

Specify any of the following options:

local-port local-port-number

Specifies the local port where the LLDP packet is received.

chassis-id chassis-id-string

Specifies the chassis ID of the switch.

port-id port-id-string

Specifies the port of the switch sending the LLDP packet.

Defaults   None

Access   CLI

History   Command introduced in Netvisor Version 2.0

Usage   Use this command to display LLDP information on the switch.

Examples  To display all LLDP information, use the following command:

CLI network-admin@switch > lldp-show

 

switch      local-port chassis-id port-id port-desc          sys-name    

----------- ---------- ---------- ------- ------------------ -----------

Leaf2       41         0a0000c5   41      PN Switch Port(41) Spine1  

Leaf2       42         0a0000c5   42      PN Switch Port(42) Spine1  

Leaf2       63         0a0001ca   63      PN Switch Port(63) Spine2

Leaf2       64         0a0001ca   64      PN Switch Port(64) Spine2

Spine2      11         0c0000b3   11      PN Switch Port(11) Leaf1   

Spine2      12         0c0000b3   12      PN Switch Port(12) Leaf1   

Spine2      43         0a0000c5   43      PN Switch Port(43) Spine1  

Spine2      44         0a0000c5   44      PN Switch Port(44) Spine1  

Spine2      63         0a0001c8   63      PN Switch Port(63) Leaf2  

Spine2      64         0a0001c8   64      PN Switch Port(64) Leaf2  

Leaf1       11         0a0001ca   11      PN Switch Port(11) Spine2

Leaf1       12         0a0001ca   12      PN Switch Port(12) Spine2

Leaf1       31         0a0000c5   31      PN Switch Port(31) Spine1  

Leaf1       32         0a0000c5   32      PN Switch Port(32) Spine1  

Spine1      31         0c0000b3   31      PN Switch Port(31) Leaf1   

Spine1      32         0c0000b3   32      PN Switch Port(32) Leaf1   

Spine1      41         0a0001c8   41      PN Switch Port(41) Leaf2  

Spine1      42         0a0001c8   42      PN Switch Port(42) Leaf2  

Spine1      43         0a0001ca   43      PN Switch Port(43) Spine2

FSpine1     44         0a0001ca   44      PN Switch Port(44) Spine2