openvswitch-interface-modify

Open vSwitch is a multilayer virtual switch licensed by Apache 2.0. It is designed to enable massive network automation through programmable extensions. This command modifies an Open vSwitch interface to the switch.

Syntax   openvswitch-interface-modify

name name-string

This parameter is not configurable. It defaults to the name that you used to create the Open vSwitch service.

Specify one or more of the following options:

ipaddr ip-address

Specify the IP address for the interface.

netmask netmask

Specify the netmask.

assignment none|static|dhcp|
dhcpv6|autov6   

Specify the method of IP address assignment.

scope local|fabric

Specify the VLAN assigned to the interface.

vlan vlan-id

Optionally, specify the VXLAN assigned to the interface.

vlan-type public|private

Specify the type of VLAN for the interface.

if mgmt|data|span

Specify an alias if desired.

alias-on alias-on-string

Specify if the interface is exclusive or not.

exclusive|no-exclusive

Specify if the NIC is enabled or disabled.

nic-enable|nic-disable

Specify the ID assigned by VRRP.

vrrp-id id 

Specify the primary interface for VRRP.

vrrp-primary vrrp-primary-string

Specify the VRRP priority for the interface.

vrrp-adv-int milliseconds

Specify the VRRP advertisement interval in milliseconds. The range is 10 to 40950 with a default value of 1000.

secondary-macs secondary-macs-string

Specify a secondary MAC address for the interface.

if-nat-realm internal|external

Specify the NAT interface realm.

priority-tag|
no-priority-tag

Specify the VLAN 0 priority tag on forwarded traffic.

Defaults   None

Access   CLI

History   

Version 2.4

Command introduced.

Version 2.4.1

The parameter, vxlan, deprecated. The parameter, vlan-type, added.

Version 2.6.2

The parameter, if-nat-realm, added.

Version 3.1.0

The parameter, priority-tag|no-priority-tag, added.

Usage   Use this command to modify an Open vSwitch interface.

Examples  To modify an Open vSwitch interface and enable the NIC, openvswitch-1, use the following command:

CLI network-admin@switch > openvswitch-controller-modify name openvswitch-1 nic-enable

openvswitch-interface-remove

Open vSwitch is a multilayer virtual switch licensed by Apache 2.0. It is designed to enable massive network automation through programmable extensions. This command removes an Open vSwitch interface to the switch.

Syntax   openvswitch-interface-remove ovs-name name-string nic nic-string

name name-string

This parameter is not configurable. It defaults to the name that you used to create the Open vSwitch service.

Specifythe following interface option:

nic nic-string

Specify the NIC to remove from the interface.

Defaults   None

Access   CLI

History   Command introduced in Version 2.4.

Usage   Use this command to remove an Open vSwitch interface.

Examples  To add an Open vSwitch controller, openvswitch-1, use the following command:

CLI network-admin@switch > openvswitch-controller-remove name openvswitch-1