vrouter-pim-ssm-map-add

SSM mapping introduces a means for the last hop router to discover sources sending to groups. When SSM mapping is configured, if a router receives an IGMPv1 or IGMPv2 membership report for a particular group G, the router translates this report into one or more (S, G) channel memberships for the well-known sources associated with this group.

Syntax   vrouter-pim-ssm-map-add

vrouter-name name-string

Specify the name of the vRouter.

Add the following PIM-SIM arguments:

id id

Specify the ID as a number between 1 and 255.

group ip-address

Specify a group PIM-SIM range IP address. The default is 232.0.0.0

source ip-address

Specify the PIM-SSM Map source address.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 3.0.0.

Usage   Use this command to configure mapping for PIM-SSM.

Examples  To map a group IP address, use the following syntax:

CLI network-admin@switch > vrouter-pim-ssm-map-add vrouter-name vr1 id 101 group 233.0.0.0/8

vrouter-pim-ssm-map-remove

This command removes mapping for PIM-SSM group IP addresses.

Syntax   vrouter-pim-ssm-map-remove

vrouter-name name-string

Specify the name of the vRouter.

Add the following PIM-SIM arguments:

id id

Specify the ID as a number between 1 and 255.

group ip-address

Specify a group PIM-SIM range IP address. The default is 232.0.0.0

source ip-address

Specify the PIM-SSM Map source address.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 3.0.0.

Usage   Use this command to remove mapping for PIM-SIM.

Examples  To remove a group IP address, use the following syntax:

CLI network-admin@switch > vrouter-pim-ssm-map-remove vrouter-name vr1 id 101 group 233.0.0.0/8

vrouter-pim-ssm-map-show

This command displays mapping for PIM-SSM group IP addresses.

Syntax   vrouter-pim-ssm-map-show

vrouter-name name-string

Specify the name of the vRouter.

Add the following PIM-SIM arguments:

id id

Specify the ID as a number between 1 and 255.

group ip-address

Specify a group PIM-SIM range IP address. The default is 232.0.0.0

source ip-address

Specify the PIM-SSM Map source address.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 3.0.0.

Usage   Use this command to display mapping for PIM-SSM.

Examples  To display mapping, use the following syntax:

CLI network-admin@switch > vrouter-pim-ssm-mapping-show vrouter-name vr1 id 101 group 233.0.0.0/8

vrouter-name id group

------------ -- -----------

VR1          0  232.0.0.0/8

VR1          1  233.0.0.0/8