Configuring Route Maps for OSPF Routes

Configure route maps to associate a redistributed metric or metric-type for OSPFv3. You can define a route map to prevent OSPF routes from getting added to the routing table. This filtering happens at the time when OSPF installs the route in the routing table.

Before you configure route maps, configure a list of prefixes using the following command:

CLI (network-admin@Leaf1) > vrouter-prefix-list-add

Use the following set of commands to configure route maps for OSPF:

CLI (network-admin@Leaf1) > vrouter-route-map-add

vrouter-name name-string	Specify the name of the vRouter service.
name name-string	Specify the name for the route map.
seq integer	Specify the sequence number as an integer between 1 and 4294967295.
action permit\|deny	Specify the route map action as permit or deny.
match-prefix vrouter prefix-list name-string	Specify the name of the prefix list used for the route map.
community-attribute unset\|none\|no-export\|no-advertise\| internet\|local-AS	Specify the community attribute for the route map.
local-pref integer	Specify the local preference as an integer between -1 and 4294967295.
metric none	Specify the metric as none.
metric-type 1\|2	Specify the metric type as 1 or 2.

CLI (network-admin@Leaf1) > vrouter-route-map-remove

vrouter-name name-string	Specify the name of the vRouter service.
name name-string	Specify the name for the route map.
seq integer	Specify the sequence number as an integer between 1 and 4294967295.

CLI (network-admin@Leaf1) > vrouter-route-map-show

vrouter-name name-string	Displays the name of the vRouter service.
name name-string	Displays the name for the route map.
seq integer	Displays the sequence number as an integer between 1 and 4294967295.
action permit\|deny	Displays the route map action as permit or deny.
match-prefix vrouter prefix-list name-string	Displays the name of the prefix list used for the route map.
community-attribute unset\|none\|no-export\|no-advertise\| internet\|local-AS	Displays the community attribute for the route map.
local-pref integer	Displays the local preference as an integer between -1 and 4294967295.
metric none	Displays the metric as none.
metric-type 1\|2	Displays the metric type as 1 or 2.