Related Netvisor ONE CLI commands
You can verify the mappings of OpenStack configurations to the Pluribus switch fabric by using the following Netvisor ONE CLI commands:
- admin-service-show
- cluster-show
- lldp-show
- vlan-show
For example, below is a sample output for the admin-service-show command to check the web ports:
CLI (network-admin@switch-2) > admin-service-show
switch if ssh nfs web web-ssl web-ssl-port web-port snmp net-api icmp
-------- ---- --- --- --- ------- ------------ -------- ---- ------- ----
switch-2 mgmt on off on off 443 80 off off on
switch-2 data on off on off 443 80 off off on
switch-1 mgmt on off on off 443 80 off off on
switch-1 data on off on off 443 80 off off on
To change the web port details, use the admin-service-modify if mgmt web command:
CLI (network-admin@switch-2) > admin-service-modify if mgmt web
After you run the openstack network create command, verify the configuration on the Pluribus switch by using the cluster-show command. The cluster ports are added to the VLAN network. :
CLI (network-admin@aq-os-2) > cluster-show
switch name state cluster-node-1 cluster-node-2 tid mode ports remote-ports cluster-sync- cluster-sync-
timeout(ms) offline-count
-------- -------------- ------ -------------- -------------- ---- ------ --------- ------------ -------------- --------------
leo-os-1 Cluster-leo-os online leo-os-1 leo-os-2 8075 slave 23-26,272 23-26,272 2000 3
leo-os-2 Cluster-leo-os online leo-os-1 leo-os-2 8075 master 23-26,272 23-26,272 2000 3
aq-os-2 Cluster-aq-os online aq-os-2 aq-os-1 7968 slave 27-30,272 27-30,272 2000 3
aq-os-1 Cluster-aq-os online aq-os-2 aq-os-1 7968 master 27-30,272 27-30,272 2000 3
After you run the openstack subnet create command, verify using the lldp-show command along with the controller node details on the switch:
CLI (network-admin@aq-os-1) > lldp-show sys-name server-os-4.pluribusnetworks.com
switch local-port chassis-id port-id port-desc sys-name
------- ---------- ----------------- ----------------- --------- --------------------------------
aq-os-1 1 0c:c4:7a:6c:5c:52 00:12:c0:88:0c:36 enp4s0f0 server-os-4.pluribusnetworks.com
aq-os-1 2 0c:c4:7a:6c:5c:52 00:12:c0:88:0c:37 enp4s0f1 server-os-4.pluribusnetworks.com
aq-os-1 11 0c:c4:7a:6c:5c:52 0c:c4:7a:6c:5c:53 eno2 server-os-4.pluribusnetworks.com
aq-os-2 1 0c:c4:7a:6c:5c:52 00:12:c0:88:0c:38 ens73f0 server-os-4.pluribusnetworks.com
aq-os-2 2 0c:c4:7a:6c:5c:52 00:12:c0:88:0c:39 ens73f1 server-os-4.pluribusnetworks.com
In the above output, server-os-4.pluribusnetworks.com is the controller name and all the above ports are added to the VLAN network (VLAN 259 in this example). Verify using the vlan-show id 259 command:
CLI (network-admin@aq-os-2) > vlan-show id 259
switch id type vxlan replicators scope description active stats ports untagged-ports active-edge-ports
-------- --- ------ -------- ---------- ------ ------- ------- ---- ----------- --------------- --------------
aq-os-2 259 public 11000259 none cluster ostack-vlan-259 yes no 0-2,27-30,272-273 none 273
leo-os-1 259 public 11000259 none cluster ostack-vlan-259 yes no 23-26,272 none none
leo-os-2 259 public 11000259 none cluster ostack-vlan-259 yes no 23-26,272 none none
aq-os-1 259 public 11000259 none cluster ostack-vlan-259 yes no 0-2,11,27-30,272-273 none 273
After you run the OpenStack server/port create, verify using the lldp-show command along with the compute node details on the switch:
CLI (network-admin@aq-os-1) > lldp-show sys-name server-os-9.pluribusnetworks.com
switch local-port chassis-id port-id port-desc sys-name
-------- ---------- ----------------- ----------------- --------- --------------------------------
leo-os-1 18 40:8d:5c:d6:20:e3 00:12:c0:80:30:23 enp1s0f1 server-os-9.pluribusnetworks.com
leo-os-2 18 40:8d:5c:d6:20:e3 00:12:c0:80:30:22 enp1s0f0 server-os-9.pluribusnetworks.com
In the above output, server-os-9.pluribusnetworks.com is the compute node name and the above ports are added to the VLAN network (VLAN 259 in this example). Verify using the vlan-show id 259 command:
CLI (network-admin@aq-os-2) > vlan-show id 259
switch id type vxlan replicators scope description active stats ports untagged-ports active-edge-ports
-------- --- ------ -------- ----------- ------- --------------- ------ ----- -------------------- -------------- -----------------
aq-os-2 259 public 11000259 none cluster ostack-vlan-259 yes no 0-2,27-30,272-273 none 273
leo-os-1 259 public 11000259 none cluster ostack-vlan-259 yes no 18,23-26,272 none 18
leo-os-2 259 public 11000259 none cluster ostack-vlan-259 yes no 18,23-26,272 none 18
aq-os-1 259 public 11000259 none cluster ostack-vlan-259 yes no 0-2,11,27-30,272-273 none 273
For details on the above Netvisor ONE commands, see the Configuration Guide for Netvisor ONE and Command Reference Guides for Netvisor ONE from the Pluribus Networks website.