E Commands
err-disable-clear-counters
Physical ports are automatically disabled by Netvisor due to certain violations. For example, if a port receives BPDU messages from an edge port, Netvisor disables the port because receiving BPDUs on a edge port is a security violation. However, there is no way to indicate that the port is shut down because of a violation and not because of physical link issues.
Syntax err-disable-clear-counters
|
bpduguard|no-bpduguard |
Specify if you want BPDU guard enabled. |
|
macsecurity|no-macsecurity |
Specify if you want MAC recovery enabled. |
|
recovery-timer duration: #d#h#m#s |
Specify the recovery time value. |
Defaults None
Access Network Administrator
History Command introduced in Version 2.6.0.
Usage Use this command to reset port error counters.
Examples To clear port error counters, use the following syntax:
CLI network-admin@switch > err-disable-clear-counters
err-disable-modify
Physical ports are automatically disabled by Netvisor due to certain violations. For example, if a port receives BPDU messages from an edge port, Netvisor disables the port because receiving BPDUs on a edge port is a security violation. However, there is no way to indicate that the port is shut down because of a violation and not because of physical link issues.
Syntax err-disable-modify
|
bpduguard|no-bpduguard |
Specify if you want BPDU guard enabled. |
|
macsecurity|no-macsecurity |
Specify if you want MAC recovery enabled. |
|
recovery-timer duration: #d#h#m#s |
Specify the recovery time value. |
Defaults None
Access Network Administrator
History Command introduced in Version 2.6.0.
Usage Use this command to modify port error counters.
Examples To clear port error counters, use the following syntax:
CLI network-admin@switch > err-disable-modify
err-disable-counters-clear
Physical ports are automatically disabled by Netvisor due to certain violations. For example, if a port receives BPDU messages from an edge port, Netvisor disables the port because receiving BPDUs on a edge port is a security violation. However, there is no way to indicate that the port is shut down because of a violation and not because of physical link issues.
Syntax err-disable-counters-clear
|
bpduguard|no-bpduguard |
Specify if you want to clear BPDU guard counters. |
|
macsecurity|no-macsecurity |
Specify if you want to clear MAC recovery counters. |
|
recovery-timer duration: #d#h#m#s |
Specify the recovery time value. |
Defaults None
Access Network Administrator
History Command introduced in Version 2.6.0.
Usage Use this command to reset port error counters.
Examples To clear port error counters, use the following syntax:
CLI network-admin@switch > err-disable-counters-clear
eula-show
This command is used to display the End User License Agreement (EULA).
Syntax eula-show
Defaults None
Access Network Administrator
History Command introduced in Version 2.6.0.
Usage Use this command to display the End User License Agreement (EULA).
Examples To display End User License Agreement (EULA), use the following syntax:
CLI network-admin@switch > eula-show
exit
This command allows you to exit the CLI.
Defaults None
Access CLI.
Usage Use this command to exit the CLI.