fabric-in-band-network-create
This command is used to create an in-band fabric network.
Syntax fabric-in-band-network-create network ip-address netmask netmask
|
network ip-address |
Specify an in-band network IP address. |
|
netmask netmask |
Specify the netmask. |
Defaults None
Access Network Admin
History Command introduced in Version 2.4.1.
Usage Use this command to create an in-band network for a fabric.
Examples To create an in-band network using the IP address 172.16.21.135, and netmask 255.255.255.0, use the following syntax:
CLI network-admin@switch > fabric-in-band-network-create network 172.16.21.135 netmask 255.255.255.0
fabric-in-band-network-delete
This command is used to delete an in-band fabric network.
Syntax fabric-in-band-network-delete network ip-address netmask netmask
|
network ip-address |
Specify an in-band network IP address. |
|
netmask netmask |
Specify the netmask. |
Defaults None
Access Network Admin
History Command introduced in Version 2.4.1.
Usage Use this command to delete an in-band network for a fabric.
Examples To delete an in-band network using the IP address 172.16.21.135, and netmask 255.255.255.0, use the following syntax:
CLI network-admin@switch > fabric-in-band-network-delete network 172.16.21.135 netmask 255.255.255.0
fabric-in-band-network-show
This command is used to display an in-band fabric network network.
Syntax fabric-in-band-network-show network ip-address netmask netmask
|
network ip-address |
Specify an in-band network IP address. |
|
netmask netmask |
Specify the netmask. |
Defaults None
Access Network Admin
History Command introduced in Version 2.4.1.
Usage Use this command to display an in-band network for a fabric.
Examples To display an in-band network, use the following syntax:
CLI network-admin@switch > fabric-in-band-network-show