vrouter-bfd-neighbor-show

Bidirectional Forwarding Detection (BFD) provides fast BFD peer failure detection times independently of all media types, encapsulations, topologies, and routing protocols BGP, EIGRP, IS-IS, and OSPF. By sending rapid failure detection notices to the routing protocols in the local router to initiate the routing table recalculation process, BFD contributes to greatly reduced overall network convergence time.

Syntax vrouter-bfd-neighbor-show

vrouter-name name-string	Specifies a name for the vRouter service.
Specify the following BFD arguments:
out-addr ip-address	Specifies the outgoing IP address.
neighbor ip-address	Specifies a neighbor IP address.
local-discr local-discr-number	Specifies the local discriminator.
remote-discr remote-discr-number	Specifies the remote discriminator.
holdown holdown-number(ms)	Specifies the detection time if the BFD session is established.
multiplier multiplier-number	Specifies a detection time multiplier.
state unknown\|admin-down\|down\|init\|upno-session\|not-replicator-vtep	Specifies the state of the BFD session.
interface interface-string	Specifies the interface of the connection.
flap-count flap-count-number	Specifies the flap count on the router.
remote-router remote-router-string	Specifies the remote router name derived from the IP address.
tx-int tx-int-number	Specifies the minimum transmit interval in milliseconds.
rx-int rx-int-number	Specifies the minimum receive interval in milliseconds.

Defaults None.

Access CLI

History

Version 2.2.6	Command introduced.
Version 2.4.1	The parameters, flap-count and remote-router, added.

Usage Displays information about Bidirectional Forwarding Direction neighbors.

Examples To display information about BFD, use the following command:

CLI network-admin@switch > vrouter-bfd-neighbor-show