vrouter-prefix-list-add

Prefix lists are used by BGP and OSPF to filter route advertisements.

Syntax   vrouter-prefix-list-add

vrouter-name name-string

Specify the name of the vRouter.

Specify the following prefix-list arguments:

name name-string

Specify a name for the prefix list.

action permit|deny

Specify the type of action, permit or deny.

prefix ip-address

Specify the IP address used as the prefix.

netmask netmask

Specify the netmask of the IP address.

Specify any of the following options:

seq number

Specify a sequence number. This is a number between 1 and 4294967295.

min-prefix-len number

Specify the minimum prefix length. This is a value between 0 and 32.

max-prefix-len number

Specify the maximum prefix length. This is a value between 0 and 32.

Defaults   None

Access   CLI

History   

Version 2.2.3

Command introduced.

Version 2.2.4

The parameter, any, added.

Version 2.5

The parameter, anyv6, added.

Version 5.1.0

The parameters, any and anyv6, deprecated.

Usage   Use this command to specify prefix lists used with BGP and OSPF.

Examples  To configure a prefix list, no-ads, with the action, deny, prefix, 10.9.11.13/32, and minimum prefix length 15, use the following syntax:

CLI network-admin@switch > vrouter-prefix-list-add vrouter-name vrouter-ospf name no-ads action deny prefix 10.9.11.13 netmask 255.255.255.0 min-prefix-len 15

vrouter-prefix-list-modify

Prefix lists are used by BGP and OSPF to filter route advertisements.

Syntax   vrouter-prefix-list-modify

vrouter-name name-string

Specify the name of the vRouter.

Specify the following prefix-list arguments:

name name-string

Specify a name for the prefix list.

action permit|deny

Specify the type of action, permit or deny.

prefix ip-address

Specify the IP address used as the prefix.

netmask netmask

Specify the netmask of the IP address.

Specify any of the following options:

seq number

Specify a sequence number. This is a number between 1 and 4294967295.

min-prefix-len number

Specify the minimum prefix length. This is a value between 0 and 32.

max-prefix-len number

Specify the maximum prefix length. This is a value between 0 and 32.

Defaults   None

Access   CLI

History   

Version 2.2.3

Command introduced.

Version 2.2.4

The parameter, any, added.

Version 2.5

The parameter, anyv6, added.

Version 5.1.0

The parameters, any and anyv6, deprecated.

Usage   Use this command to modify prefix lists used with BGP and OSPF.

Examples  To modify a prefix list, no-ads, and change the action to permit, use the following syntax:

CLI network-admin@switch > vrouter-prefix-list-modify vrouter-name vrouter-ospf name no-ads action permit

vrouter-prefix-list-remove

Prefix lists are used by BGP and OSPF to filter route advertisements.

Syntax   vrouter-prefix-list-remove vrouter-name name-string name name-string seq number 

vrouter-name name-string

Specify the name of the vRouter.

Specify the following prefix-list arguments:

name name-string

Specify a name for the prefix list.

Specify any of the following options:

seq number

Specify a sequence number. This is a number between 1 and 4294967295.

Defaults   None

Access   CLI

History   Command introduced in Version 2.2.3.

Usage   Use this command to remove prefix lists used with BGP and OSPF.

Examples  To remove a prefix list, no-ads, use the following syntax:

CLI network-admin@switch > vrouter-prefix-list-remove vrouter-name vrouter-ospf name no-ads

vrouter-prefix-list-show

Prefix lists are used by BGP and OSPF to filter route advertisements.

Syntax   vrouter-prefix-list-show

vrouter-name name-string

Specify the name of the vRouter.

Specify the following prefix-list arguments:

name name-string

Specify a name for the prefix list.

action permit|deny

Specify the type of action, permit or deny.

prefix ip-address

Specify the IP address used as the prefix.

netmask netmask

Specify the netmask of the IP address.

Specify any of the following options:

seq number

Specify a sequence number. This is a number between 1 and 4294967295.

min-prefix-len number

Specify the minimum prefix length. This is a value between 0 and 32.

max-prefix-len number

Specify the maximum prefix length. This is a value between 0 and 32.

Defaults   None

Access   CLI

History   

Version 2.2.3

Command introduced.

Version 2.2.4

The parameter, any, added.

Version 2.5

The parameter, anyv6, added.

Version 5.1.0

The parameters, any and anyv6, deprecated.

Usage   Use this command to modify prefix lists used with BGP and OSPF.

Examples  To modify a prefix list, no-ads, and change the action to permit, use the following syntax:

CLI network-admin@switch > vrouter-prefix-list-modify vrouter-name vrouter-ospf name no-ads action permit