Setting the Date and Time
You can set the date and time on a switch by modifying the switch configuration using the switch-setup-modify command. For example, to change the date and time to September 24, 2019, 09:30:00, use the following command syntax:
CLI (network-admin@Leaf1) > switch-setup-modify date 2019-09-24T09:30:00
To display the configured setting, use the switch-setup-show command:
CLI (network-admin@Leaf2) > switch-setup-show
switch-name: Leaf2
mgmt-ip: 10.14.30.18/23
mgmt-ip-assignment: static
mgmt-ip6: 2721::3617:ebff:fef7:94c4/64
mgmt-ip6-assignment: autoconf
mgmt-link-state: up
mgmt-link-speed: 1g
in-band-ip: 192.168.101.7/24
in-band-ip6: fe80::640e:94ff:fe83:cefa/64
in-band-ip6-assign: autoconf
gateway-ip: 10.14.30.1
dns-ip: 10.20.4.1
dns-secondary-ip: 172.16.1.4
domain-name: pluribusnetworks.com
ntp-server: 0.us.pool.ntp.org
ntp-secondary-server: 0.ubuntu.pool.ntp.org
timezone: America/Los_Angeles
date: 2019-09-24,09:30:00
hostid: 184555395
location-id: 7
enable-host-ports: yes
banner: * Welcome to Pluribus Networks Inc. Netvisor(R). This is a monitored system. *
device-id: 1WDQX42
banner: * ACCESS RESTRICTED TO AUTHORIZED USERS ONLY *
banner: * By using the Netvisor(R) CLI,you agree to the terms of the Pluribus Networks *
banner: * End User License Agreement (EULA). The EULA can be accessed via *
banner: * http://www.pluribusnetworks.com/eula or by using the command "eula-show" *
Changing the Default Timezone
By default, Netvisor sets the default timezone to US/Pacific Standard Time (PST).
To change the timezone, use the switch-setup-modify command:
CLI (network-admin@Leaf1) > switch-setup-modify timezone time-zone name