Changing Switch Setup Parameters

You can modify the following switch parameters by using the switch-setup-modify command:

• Switch name
• Management IPv4 and IPv6 addresses
• Management IPv4 and IPv6 netmasks
• Management IPv4 and IPv6 address assignments
• In-band IPv4 address
• In-band netmask
• Gateway IPv4 address
• Gateway IPv6 address
• Primary and secondary IPv4 addresses for DNS services
• Domain name
• NTP server
• End User License Agreement (EULA) acceptance and timestamp
• Password
• Date
• Analytics store (storage type)
• Message of the Day (MOTD)
• Banner

For example if you want to change the date and time on the switch, use the command:

CLI (network-admin@switch-1) > switch-setup-modify date 2019-08-05 T04:30:00

To view the changed date (see bold in output), use the show command: 

CLI (network-admin@Leaf1) > switch-setup-show

switch-name:                         plu005swl01

mgmt-ip:                                 10.80.241.235/25

mgmt-ip-assignment:         static

mgmt-ip6:                         2001:aaaa::10:80:241:235/112

mgmt-ip6-assignment:         static

in-band-ip:                         192.168.241.235/24

in-band-ip6:                         fe80::640e:94ff:fe3f:fafc/64

in-band-ip6-assign:         autoconf

gateway-ip:                         10.80.241.129

gateway-ip6:                         2001:aaaa::10:80:241:ffff

dns-ip:                                 10.80.241.94

dns-secondary-ip:                 10.80.241.98

domain-name:                         pluribusnetworks.com

ntp-server:                         10.80.241.94

timezone:                         America/Los_Angeles

date:                                 2019-08-05,04:30:00

enable-host-ports:                 yes

banner:                                 * S2L CONVERSION SETUP ERIC05 *