bridge-domain-create
A bridge domain is a set of logical ports that share the same flooding or broadcast characteristics. This command creates a bridge domain.
Syntax bridge-domain-create
|
name name-string |
Specify the name for the bridge domain. |
|
scope local|cluster|fabric |
Specify the bridge domain scope. |
|
Specify any of the following options: |
|
|
vnet vnet name |
VNET for this Bridge Domain. |
|
vxlan 0..16777215 |
Specify the VXLAN identifier for the tunnel. |
|
auto-vxlan|no-auto-vxlan |
Specify the options to automatically assign VXLAN and/or assign to VTEPs. |
|
description description-string |
Add a bridge domain description. |
|
rsvd-vlan 1..4093 |
Specify the fabric reserved VLAN for cluster switches for bridge domain. |
|
local-rsvd-vlan 1..4093 |
Specify the local reserved VLAN for cluster switches for bridge domain. |
|
vxlan-inner-packet auto|remove-tags|transparent |
Preserve original Ethernet header inside the VXLAN tunnel. |
|
mac-learning|no-mac-learning |
Specify if you want to enable or disable MAC address learning. |
|
l2-tunneling none|lldp|stp|lacp|all |
Enable L2 tunneling on this bridge domain. You can tunnel LLDP, STP, and LACP packets by specifying the corresponding keywords. |
Defaults None
History
|
Version 5.2.0 |
Command introduced. |
|
Version 6.0.0 |
The parameter, mac-learning, added. |
|
Version 6.1.1 |
The parameter l2-tunneling added. |
Usage Use this command to create a bridge domain.
Examples To create a bridge domain with the name bd100 and cluster scope, use the command:
CLI network-admin@switch > bridge-domain-create name bd100 scope cluster