cluster-show
To display a cluster configuration in a fabric, use the cluster-show command.
Syntax cluster-show
|
name name-string |
Specifies the name of the cluster. |
|
cluster-id |
Specifies the ID assigned to the cluster configuration. |
|
state |
• offline • unavailable • online • coming-online • slave-ready • going offline |
|
cluster-node-1 |
Specifies the name of the first switch in the cluster. |
|
cluster-node-2 |
Specifies the name of the second switch in the cluster. |
|
tid tid-number |
Specifies the transaction ID number. |
|
mode none|master|slave |
Specifies the mode assigned to the cluster. |
|
ports port-list |
Specifies the list of ports. |
|
remote-ports port-list |
Specifies the list of remote ports. |
|
validate|no-validate |
Validate the inter-switch links and state of the switches in the cluster. |
|
cluster-sync-timeout milliseconds |
Specify the amount of time before a cluster times out during synchronization. Specify a time between 500 and 2000 ms. |
|
cluster-sync-offline-count number |
Specify the number of missed synchronizations before the cluster goes offline. |
|
enable|disable |
Displays if you enabled or disabled STP. |
|
stp-mode rstp|mstp |
Displays the STP mode. |
|
bpdus-bridge-ports|bpdus-all-ports |
Displays if the cluster sends BPDU packets to bridge specific ports. |
|
bridge-id mac-address |
Displays the MAC address of the bridge. |
|
bridge-priority bridge-priority-number |
Displays the bridge priority with a default value of 32768. |
|
hello-time seconds |
Displays the hello time in seconds |
|
forwarding-delay seconds |
Displays the forwarding time delay in seconds. |
|
max-age seconds |
Displays the maximum aging time in seconds. |
|
mst-max-hops count |
Displays the number of maximum hops for MSTP BPDUs. |
|
mst-config-name mst-config-name-string |
Displays the name of the MST configuration instance. |
|
mst-config-revision mst-config-revision-number |
Displays the MST configuration revision number. |
|
mst-config-digest mst-config-digest-string |
Displays the MST configuration digest. |
|
cluster-mode none|master|slave |
Displays the STP cluster mode. |
|
mst-digest-mismatch-on-ports port-list |
Displays MST digest mismatch. |
|
mst-digest-mismatch-on-peer-ports port-list |
Displays MST digest mismatch for cluster peer. |
|
mst-config-id-mismatch-on-ports port-list |
Displays MST Config ID mismatch. |
|
mst-config-id-mismatch-on-peer-ports port-list |
Displays MST Config ID mismatch for cluster peer. |
|
mst-revision-mismatch-on-ports port-list |
Displays MST Revision mismatch. |
|
mst-revision-mismatch-on-peer-ports port-list |
Displays MST Revision mismatch for cluster peer. |
|
root-guard-wait-time seconds |
Displays the root guard wait time. |
Defaults None
Access CLI
History
|
Version 1.2 |
Command introduced. |
|
Version 2.1 |
The parameter, private-link, added. |
|
Version 2.2 |
The parameter, private-link, deprecated. |
|
Version 2.4 |
The parameters, mode and remote-ports, added. The option, synching, deprecated. The option, slave-ready, and going-offline added. |
|
Version 2.4.1 |
The parameters, online, and unavailable added. |
|
Version 3.0.0 |
The parameters, cluster-sync-timeout and cluster-sync-offline-count added. |
|
Version 6.0.1 |
The parameters, mst-config-revision, added. |
Usage Displays information about cluster configurations on the network.
Examples To show information about a cluster configuration, use the following command:
CLI network-admin@switch > cluster-show format all layout vertical
name: vlag
id: a000030:1
state: online
cluster-node-1: pubdev01
cluster-node-2: pubdev02
tid: 0
mode: master
remote-port: 33,34
ports: 26,128