err-disable-counters-clear

Physical ports are automatically disabled by Netvisor due to certain violations. For example, if a port receives BPDU messages from an edge port, Netvisor disables the port because receiving BPDUs on a edge port is a security violation. However, there is no way to indicate that the port is shut down because of a violation and not because of physical link issues.


Syntax   err-disable-counters-clear


bpduguard|no-bpduguard

Specify if you want to clear BPDU guard counters.

macsecurity|no-macsecurity

Specify if you want to clear MAC recovery counters.

recovery-timer duration: #d#h#m#s

Specify the recovery time value.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 2.6.0.

Usage   Use this command to reset port error counters.

Examples  To clear port error counters, use the following syntax:

CLI network-admin@switch > err-disable-counters-clear

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south